A Two-Dimensional Photonic Crystal Slab Mirror with Silicon on Insulator for Wavelength 1.3μm

A concrete two-dimensional photonic crystal slab with triangular lattice used as a mirror for the light at wavelength 1.3μm with a silicon-on-insulator （SOI） substrate is designed by the three-dimensional plane wave expansion method. For TE-like modes, the bandgap in the Г-K direction is from 1087nm to 1559nm. The central wavelength in the bandgap is about 1.3μm, hence the incident light at wavelength 1.3μm will be strongly reflected. Experimentally, such a photonic crystal slab is fabricated on an SOI substrate by the combination of EBL and ICP etching. The measurement of its transmission characteristics shows the bandgap edge in a longer wavelength is about 1540 nm. The little discrepancy between the experimental data and the theoretical values is mainly due to the size discrepancy of the fabricated air holes.     

Isoscaling Behaviour in the Isospin-Dependent Quantum Molecular Dynamics Model

The isoscaling behaviour is investigated in a frame of isospin-dependent quantum molecular dynamics models. The isotopic yields ratio Y2/Y1 for reactions ^48Ca ^48Ca and ^40 Ca ^4oCa at different entrance channels are simulated and presented, the relationship between the isoscaling parameter and the entrance channel is analysed, the results show that a and β reduce with the rise of incident energies and increase with the impact parameter b, which can be attributed to the temperature varying of the pre-fragments in different entrance channels. The relation of a and symmetry-term coefficient Csym reveals that the chemical potential difference △μ is sensitive to thesymmetry-term coefficient Csym, and raises with the increasing Csym.     

测定有机氧元素的新型Mo／碳化树脂催化剂的研制

本文报道一种制各具有高分散金属和高机械强度的Ｍｏ／碳化树脂催化剂的新方法。使用该种催化剂库仑法测定微量有机氧元素取得较满意结果。文中还对Ｍｏ在催化剂上的价态，表面形貌和分布；催化活性物质的形成和制备过程中的一些问题作了初步探讨。     

光学实验中伪像的鉴别

光学实验中伪像的鉴别闵春宗，左云彤（四平师范学院１３６０００）在光学实验和光学测量中，由于光学系统中各光学元件表面的多次反射和折射，往往能看到许多像，而对我们有用的只是其中的一两个．如果将有用的像叫做真像，那许多无用的像就叫做伪像．在实验中，应首先鉴...     

用旋轉鏡法測定光速的計算公式

福里斯的“普通物理学”一书在讲述测定光速的旋转镜法(傅科实验)时,给出了如下的光速计算公式: c=4ωLl/△S· (1)对于推证过程,作者只作了很简略的阐述。本     

邻菲罗啉—曙红体系共沉淀纸上分光光度法测铁

采用邻菲罗啉试剂作为络合剂，与铁（Ⅱ）形成络阳离子后，用曙红阴离子缔合沉淀之，再加入酚酞共沉淀剂使其缔合沉淀完全。将络离子缔合物吸滤在滤纸上，后者直接置于７２１型分光光度计中，用吸光度差值法定量，操作简单快速，选择性好，灵敏度高；以取样体积１０ｍＬ，最小检出浓度为１．５×１０＾－９／ｇ／ｍＬ。     

Electronic Structure of Si1-xⅣx/Si Superlattices on Si （001）

We have preformed systematical ab initio studies of the structural and electronic properties of short-period Si1-xⅣx/Si （x = 0.125, 0.25, 0.5, Ⅳ=Ge, Sn） superlattices （SLs） grown along the [001] direction on bulk Si. The present calculations reveal that the Si0.875Ge0.125/Si, Si0.75Ge0.25/Si and Si0.875Sn0.125/Si are the F-point direct bandgap semiconductors. The technological importance lies in the expectation that the direct gap Si1-xⅣx/Si SLs may be used as components in integrated optoelectronic devices, in conjunction with the already well-established and highly advanced silicon technology.     

新型Ni—Pd/碳化树脂催化剂的制备及在微量测定有机氧元素中的应用

本文报道一种新型Ni—Pd／碳化树脂催化剂的制备方法，用该法制备的催化剂具有高金属分散度和高机械强度，用于库仑法微量测定有机氧元素取得满意结果。文中对Ni和Pd颗粒在催化剂上表面形貌和分布、催化活性等作了初步探讨。     

一种包覆型聚合物高效液相色谱固定相的制备与评价

当代应用最广的HPLC固定相中,硅胶基质填料化学稳定性较低,并且由于残存硅羟基而表现所谓第二效应,特别使碱性化合物的峰形拖尾;聚合物基质填料虽提高了化学稳定性,没有离子基团,但刚性降低,并且由于溶胀难于进行梯度淋洗;面包覆型聚合物填料则可综合二者的优点,本文对我们制备的这种固定相作初步报道。     

κ-卡拉胶热可逆凝胶的非遍历行为研究

采用散射斑纹(speckle)技术,即散射光强涨落法,研究了κ-卡拉胶(KC)热可逆凝胶的非遍历行为.证明了非遍历性的存在,并研究了浓度、温度等条件对该非遍历性的影响.结果表明:该物理凝胶存在非遍历性,并随KC浓度增加,凝胶非遍历性增大;随温度升高,凝胶非遍历性逐渐减小,直至消失.